Interface CreateFileSystemRequest.Builder

All Superinterfaces:
AwsRequest.Builder, Buildable, CopyableBuilder<CreateFileSystemRequest.Builder,CreateFileSystemRequest>, EfsRequest.Builder, SdkBuilder<CreateFileSystemRequest.Builder,CreateFileSystemRequest>, SdkPojo, SdkRequest.Builder
Enclosing class:
CreateFileSystemRequest
@Mutable @NotThreadSafe public static interface CreateFileSystemRequest.Builder extends EfsRequest.Builder, SdkPojo, CopyableBuilder<CreateFileSystemRequest.Builder,CreateFileSystemRequest>

  • Method Details

    • creationToken

      CreateFileSystemRequest.Builder creationToken(String creationToken)

      A string of up to 64 ASCII characters. Amazon EFS uses this to ensure idempotent creation.

      Parameters:
      creationToken - A string of up to 64 ASCII characters. Amazon EFS uses this to ensure idempotent creation.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • performanceMode

      CreateFileSystemRequest.Builder performanceMode(String performanceMode)

      The performance mode of the file system. We recommend generalPurpose performance mode for all file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created. The maxIO mode is not supported on One Zone file systems.

      Due to the higher per-operation latencies with Max I/O, we recommend using General Purpose performance mode for all file systems.

      Default is generalPurpose.

      Parameters:
      performanceMode - The performance mode of the file system. We recommend generalPurpose performance mode for all file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created. The maxIO mode is not supported on One Zone file systems.

      Due to the higher per-operation latencies with Max I/O, we recommend using General Purpose performance mode for all file systems.

      Default is generalPurpose.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • performanceMode

      CreateFileSystemRequest.Builder performanceMode(PerformanceMode performanceMode)

      The performance mode of the file system. We recommend generalPurpose performance mode for all file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created. The maxIO mode is not supported on One Zone file systems.

      Due to the higher per-operation latencies with Max I/O, we recommend using General Purpose performance mode for all file systems.

      Default is generalPurpose.

      Parameters:
      performanceMode - The performance mode of the file system. We recommend generalPurpose performance mode for all file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created. The maxIO mode is not supported on One Zone file systems.

      Due to the higher per-operation latencies with Max I/O, we recommend using General Purpose performance mode for all file systems.

      Default is generalPurpose.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • encrypted

      CreateFileSystemRequest.Builder encrypted(Boolean encrypted)

      A Boolean value that, if true, creates an encrypted file system. When creating an encrypted file system, you have the option of specifying an existing Key Management Service key (KMS key). If you don't specify a KMS key, then the default KMS key for Amazon EFS, /aws/elasticfilesystem, is used to protect the encrypted file system.

      Parameters:
      encrypted - A Boolean value that, if true, creates an encrypted file system. When creating an encrypted file system, you have the option of specifying an existing Key Management Service key (KMS key). If you don't specify a KMS key, then the default KMS key for Amazon EFS, /aws/elasticfilesystem, is used to protect the encrypted file system.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • kmsKeyId

      CreateFileSystemRequest.Builder kmsKeyId(String kmsKeyId)

      The ID of the KMS key that you want to use to protect the encrypted file system. This parameter is required only if you want to use a non-default KMS key. If this parameter is not specified, the default KMS key for Amazon EFS is used. You can specify a KMS key ID using the following formats:

      • Key ID - A unique identifier of the key, for example 1234abcd-12ab-34cd-56ef-1234567890ab.

      • ARN - An Amazon Resource Name (ARN) for the key, for example arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab.

      • Key alias - A previously created display name for a key, for example alias/projectKey1.

      • Key alias ARN - An ARN for a key alias, for example arn:aws:kms:us-west-2:444455556666:alias/projectKey1.

      If you use KmsKeyId, you must set the CreateFileSystemRequest$Encrypted parameter to true.

      EFS accepts only symmetric KMS keys. You cannot use asymmetric KMS keys with Amazon EFS file systems.

      Parameters:
      kmsKeyId - The ID of the KMS key that you want to use to protect the encrypted file system. This parameter is required only if you want to use a non-default KMS key. If this parameter is not specified, the default KMS key for Amazon EFS is used. You can specify a KMS key ID using the following formats:

      • Key ID - A unique identifier of the key, for example 1234abcd-12ab-34cd-56ef-1234567890ab .

      • ARN - An Amazon Resource Name (ARN) for the key, for example arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab.

      • Key alias - A previously created display name for a key, for example alias/projectKey1.

      • Key alias ARN - An ARN for a key alias, for example arn:aws:kms:us-west-2:444455556666:alias/projectKey1.

      If you use KmsKeyId, you must set the CreateFileSystemRequest$Encrypted parameter to true.

      EFS accepts only symmetric KMS keys. You cannot use asymmetric KMS keys with Amazon EFS file systems.

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • throughputMode

      CreateFileSystemRequest.Builder throughputMode(String throughputMode)

      Specifies the throughput mode for the file system. The mode can be bursting, provisioned, or elastic. If you set ThroughputMode to provisioned, you must also set a value for ProvisionedThroughputInMibps. After you create the file system, you can decrease your file system's Provisioned throughput or change between the throughput modes, with certain time restrictions. For more information, see Specifying throughput with provisioned mode in the Amazon EFS User Guide.

      Default is bursting.

      Parameters:
      throughputMode - Specifies the throughput mode for the file system. The mode can be bursting, provisioned, or elastic. If you set ThroughputMode to provisioned, you must also set a value for ProvisionedThroughputInMibps. After you create the file system, you can decrease your file system's Provisioned throughput or change between the throughput modes, with certain time restrictions. For more information, see Specifying throughput with provisioned mode in the Amazon EFS User Guide.

      Default is bursting.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • throughputMode

      CreateFileSystemRequest.Builder throughputMode(ThroughputMode throughputMode)

      Specifies the throughput mode for the file system. The mode can be bursting, provisioned, or elastic. If you set ThroughputMode to provisioned, you must also set a value for ProvisionedThroughputInMibps. After you create the file system, you can decrease your file system's Provisioned throughput or change between the throughput modes, with certain time restrictions. For more information, see Specifying throughput with provisioned mode in the Amazon EFS User Guide.

      Default is bursting.

      Parameters:
      throughputMode - Specifies the throughput mode for the file system. The mode can be bursting, provisioned, or elastic. If you set ThroughputMode to provisioned, you must also set a value for ProvisionedThroughputInMibps. After you create the file system, you can decrease your file system's Provisioned throughput or change between the throughput modes, with certain time restrictions. For more information, see Specifying throughput with provisioned mode in the Amazon EFS User Guide.

      Default is bursting.

      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • provisionedThroughputInMibps

      CreateFileSystemRequest.Builder provisionedThroughputInMibps(Double provisionedThroughputInMibps)

      The throughput, measured in mebibytes per second (MiBps), that you want to provision for a file system that you're creating. Required if ThroughputMode is set to provisioned. Valid values are 1-3414 MiBps, with the upper limit depending on Region. To increase this limit, contact Amazon Web ServicesSupport. For more information, see Amazon EFS quotas that you can increase in the Amazon EFS User Guide.

      Parameters:
      provisionedThroughputInMibps - The throughput, measured in mebibytes per second (MiBps), that you want to provision for a file system that you're creating. Required if ThroughputMode is set to provisioned. Valid values are 1-3414 MiBps, with the upper limit depending on Region. To increase this limit, contact Amazon Web ServicesSupport. For more information, see Amazon EFS quotas that you can increase in the Amazon EFS User Guide.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • availabilityZoneName

      CreateFileSystemRequest.Builder availabilityZoneName(String availabilityZoneName)

      For One Zone file systems, specify the Amazon Web Services Availability Zone in which to create the file system. Use the format us-east-1a to specify the Availability Zone. For more information about One Zone file systems, see EFS file system types in the Amazon EFS User Guide.

      One Zone file systems are not available in all Availability Zones in Amazon Web Services Regions where Amazon EFS is available.

      Parameters:
      availabilityZoneName - For One Zone file systems, specify the Amazon Web Services Availability Zone in which to create the file system. Use the format us-east-1a to specify the Availability Zone. For more information about One Zone file systems, see EFS file system types in the Amazon EFS User Guide.

      One Zone file systems are not available in all Availability Zones in Amazon Web Services Regions where Amazon EFS is available.

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • backup

      CreateFileSystemRequest.Builder backup(Boolean backup)

      Specifies whether automatic backups are enabled on the file system that you are creating. Set the value to true to enable automatic backups. If you are creating a One Zone file system, automatic backups are enabled by default. For more information, see Automatic backups in the Amazon EFS User Guide.

      Default is false. However, if you specify an AvailabilityZoneName, the default is true.

      Backup is not available in all Amazon Web Services Regions where Amazon EFS is available.

      Parameters:
      backup - Specifies whether automatic backups are enabled on the file system that you are creating. Set the value to true to enable automatic backups. If you are creating a One Zone file system, automatic backups are enabled by default. For more information, see Automatic backups in the Amazon EFS User Guide.

      Default is false. However, if you specify an AvailabilityZoneName, the default is true.

      Backup is not available in all Amazon Web Services Regions where Amazon EFS is available.

      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • tags

      CreateFileSystemRequest.Builder tags(Collection<Tag> tags)

      Use to create one or more tags associated with the file system. Each tag is a user-defined key-value pair. Name your file system on creation by including a "Key":"Name","Value":"{value}" key-value pair. Each key must be unique. For more information, see Tagging Amazon Web Services resources in the Amazon Web Services General Reference Guide.

      Parameters:
      tags - Use to create one or more tags associated with the file system. Each tag is a user-defined key-value pair. Name your file system on creation by including a "Key":"Name","Value":"{value}" key-value pair. Each key must be unique. For more information, see Tagging Amazon Web Services resources in the Amazon Web Services General Reference Guide.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • tags

      CreateFileSystemRequest.Builder tags(Tag... tags)

      Use to create one or more tags associated with the file system. Each tag is a user-defined key-value pair. Name your file system on creation by including a "Key":"Name","Value":"{value}" key-value pair. Each key must be unique. For more information, see Tagging Amazon Web Services resources in the Amazon Web Services General Reference Guide.

      Parameters:
      tags - Use to create one or more tags associated with the file system. Each tag is a user-defined key-value pair. Name your file system on creation by including a "Key":"Name","Value":"{value}" key-value pair. Each key must be unique. For more information, see Tagging Amazon Web Services resources in the Amazon Web Services General Reference Guide.
      Returns:
      Returns a reference to this object so that method calls can be chained together.

    • tags

      CreateFileSystemRequest.Builder tags(Consumer<Tag.Builder>... tags)

      Use to create one or more tags associated with the file system. Each tag is a user-defined key-value pair. Name your file system on creation by including a "Key":"Name","Value":"{value}" key-value pair. Each key must be unique. For more information, see Tagging Amazon Web Services resources in the Amazon Web Services General Reference Guide.

      This is a convenience method that creates an instance of the Tag.Builder avoiding the need to create one manually via Tag.builder().

      When the Consumer completes, SdkBuilder.build() is called immediately and its result is passed to tags(List<Tag>).

      Parameters:
      tags - a consumer that will call methods on Tag.Builder
      Returns:
      Returns a reference to this object so that method calls can be chained together.
      See Also:

    • overrideConfiguration

      CreateFileSystemRequest.Builder overrideConfiguration(AwsRequestOverrideConfiguration overrideConfiguration)
      Description copied from interface: AwsRequest.Builder
      Add an optional request override configuration.
      Specified by:
      overrideConfiguration in interface AwsRequest.Builder
      Parameters:
      overrideConfiguration - The override configuration.
      Returns:
      This object for method chaining.

    • overrideConfiguration

      CreateFileSystemRequest.Builder overrideConfiguration(Consumer<AwsRequestOverrideConfiguration.Builder> builderConsumer)
      Description copied from interface: AwsRequest.Builder
      Add an optional request override configuration.
      Specified by:
      overrideConfiguration in interface AwsRequest.Builder
      Parameters:
      builderConsumer - A Consumer to which an empty AwsRequestOverrideConfiguration.Builder will be given.
      Returns:
      This object for method chaining.